WHAT IS DONE DURING AN AIR CONDITIONING SERVICE?
Are you in need of an air conditioning service repair in San Antonio TX? Want to know what is done during air conditioner services? Why air conditioning service is important? Read on!
An air conditioning service is important to keep your AC unit running smoothly and efficiently. There are a few different things that air conditioning service companies will do during an AC repair service. First, Verify all electrical connections are tight, check the voltage and amperage on the motors, Inspect belts for wear, check the safety devices, such as high limit switches, Clean or change air filters, lubricate bearings and motors. Finally, they will Check Freon levels. By doing all of these things, your air conditioner will be able to run more efficiently and cool your home better. Below we discuss each of the processes.
Verify all electrical connections are tight.
- Check all electrical connections for corrosion, loose connections, and broken insulation.
- Inspect the wiring for exposed wires and damaged wires.
- Check the wiring for overloaded circuits, undersized circuits, and broken wires that may cause an electrical fire.
Check the voltage and amperage on the motors.
When you schedule a service, your air conditioning technician will first look at how much voltage and amperage are being pulled by the motor. Too much or too little can cause it to overheat, which can result in permanent damage.
Next, they’ll check belt tension. If a belt isn’t keeping up with its job of transferring power from the motor to other parts of the system like fans and pumps, it can cause damage as well.
After that, they’ll inspect for leaks by turning off all heat sources in your home (including fireplaces) and leaving them off while checking refrigerant levels. This ensures that there aren’t any leaks in your system before doing repairs on them—as well as potentially saving you money down the road!
Then comes charging time: an AC technician will add refrigerant to your cooling coils after pulling off their caps using special equipment called gauges. They’ll also check temperature differences between indoor/outdoor temperatures during different seasons—this helps ensure proper operation throughout all four seasons without having too many problems over time due to low temperatures out there on those cold days outside!
Inspect belts for wear.
When it comes to air conditioner belts, you want a new one if the belt looks worn or frayed, or if it’s cracked. If a replacement belt is needed, you’ll be looking at paying around $30 for a new belt and another $30-60 for labor depending on how long it takes (depending on what type of A/C unit you have). Replacing an air conditioning belt can take anywhere from 30 minutes to two hours depending on how complicated your system is.
Check the safety devices, such as high limit switches.
While you are at the shop, you should check the safety devices, such as high limit switches. These small electronic devices are designed to shut off power when it gets too hot inside your air conditioner. If a high limit switch is not working correctly, your AC will overheat and stop working altogether—not good!
To check if a high limit switch is faulty:
- Disconnect the power cable from its source (make sure it’s turned off!)
- Open up the access panel on top of your unit by removing any screws that hold it in place and lifting it off
Clean or change air filters.
The filters in your air conditioning system keep dust and pollen from entering your home, but they also restrict airflow. If the filter is dirty, it will cause the system to work harder to provide you with cool air. Changing or cleaning your filter can extend the life of your heating and cooling equipment by reducing wear on its motor and compressor.
There comes a time when you need to change an air filter, though—when? Cleaning too often can actually be detrimental for some systems because it could lead to clogs or other problems in the unit’s internal workings. The best rule of thumb is that if dust buildup is visible on your vents (or if you smell dust), then it’s probably time for a change.
Clean condenser coils (this is an additional charge).
If you’re like me, you probably don’t give much thought to the cleanliness of your home’s HVAC system. You may notice an annoying squeaking sound if there are leaves or other debris trapped in the coils, but when was the last time you cleaned them out? It’s not surprising that many people are unaware that this is something they need to do—it is an additional charge for an air conditioning service and not included in the standard service.
Service providers recommend cleaning condenser coils on a regular basis as part of a good maintenance routine. The reason why it’s important to keep them clean is that they’re responsible for transferring heat from inside your home to the outside air (and vice versa). Think about how dirty your car gets when parked outside on hot days; now imagine what happens when there’s even more dirt circulating through its engine components than usual!
Cleaning these parts will improve their performance and extend their life span so that they continue working properly over time.
Lubricate bearings and motors.
- Lubricating bearings and motors is a crucial step to ensure that they function properly within the system.
- Lubrication is important because it keeps metal parts from rubbing together, which can wear them down over time and cause them to fail sooner than expected.
- It’s also important for reliability because friction creates heat, which can damage both the bearings themselves and other components of the air conditioning system.
- You should have your HVAC heating and air conditioning serviced once per year by an HVAC technician who has been trained on proper lubrication techniques.
Check Freon levels.
You want to make sure that the freon levels are up to snuff. If they’re low, it’s time to top off your air conditioner with some more wonderful Freon.
- Check for leaks. Leaks can cause serious problems if left unchecked, and it’s also one of the first things that should be checked when you’re getting an AC service done.
- Conduct a leak test. If there are any leaks present in your system, this is what will show them up! A professional technician will know how best to handle any issues they find during this step of the process.
- Fix any leaks found by repairing them with new parts or by replacing old ones with new ones (if needed). This step is essential in ensuring that everything runs smoothly and efficiently from now on out!
The technician will complete a thorough inspection of your system to ensure optimal performance and efficiency.
Your technician will begin by thoroughly inspecting your system. This includes examining all components, including the condenser unit and evaporator coil, as well as checking that there is enough refrigerant in your air conditioning system. The technician will also check for leaks and other problems with any parts of the system. Once they’ve completed their inspection, they’ll clean up any debris from inside or outside of your home to ensure it runs at peak efficiency. Finally, if necessary, the technician will suggest a fix for any problems that were identified during their inspection process.
By keeping up with regular maintenance like an annual tune-up and changing your air filter monthly, you can avoid bigger problems down the road. An ounce of prevention is worth a pound of cure, so don’t wait until your HVAC system breaks down to call all service heating and air. We are happy to help keep your home comfortable all year round. Contact us today to schedule an appointment for an AC repair service! We look forward to serving you.